**This Casting Epoxy is designed to be poured under one-inch thick per pour**
This material is designed to fill voids in raw wood slab tops. Stone Coat Casting resin can be poured up to 3/4 - 1" thick depending on the mass of the project. Stone Coat Casting resin is not designed as the final coat as there is no scratch resistance or U.V. protection so you will need to apply a coat of either Stone Coat epoxy or Art Coat to achieve a protective barrier.
How to Mix Casting Epoxy:
Mix for this product is 2:1 ratio pouring part “B” (1 part) into the mixing bucket first and then part “A” (2 parts). Mix this material slowly with a paint stick, not a drill, then when trying to pop bubbles pop them as you pour 1/4" at a time then add more material and continue to torch as you go to get a crystal clear deep pour. For stubborn areas heat the tip of a screwdriver and pop the deep bubbles with the hot tip of the screwdriver.
**We do not recommend pouring large clear areas that you want to remain crystal clear. Our casting epoxy is great to tint and keep translucent but large thick areas that you want to remain crystal clear will show some amber tint to them due to the nature of this formulation.